Privacy protection that’s there only when you need it
The FLEX-WOOD side awning separates your patio or balcony exactly when you want it to—and disappears again as soon as you no longer need it. Pull the fabric out by the handle to any width up to 300 cm; it then rolls back into the cassette by itself. No setup or dismantling, and no structure that gets in the way all year round.
At 160 cm high, it protects the seating area from prying eyes and side drafts without making the patio feel enclosed. The warm, sandy beige complements wood, natural stone, and light-colored façades—it doesn’t dominate and won’t look dated even after years.
Your benefits
-
Continuously extendable up to 300 cm — stop the awning at any desired length, not only when fully extended
-
Self-retracting — the spring mechanism rolls the fabric back evenly and without creases
-
Enclosed cassette — when not in use, the fabric is protected from rain, dust, and sunlight
-
Three functions in one — privacy screen for neighboring properties, side wind protection, and protection from low afternoon sun
-
Complete mounting hardware included — wall brackets, screws, anchors, and hex key included
-
No alterations to the patio structure — cassette mounted to the wall, support post anchored in the ground
Installation — what you should know beforehand
The awning is secured at two points: the cassette to the wall using two brackets with two 10 mm anchors each, and the support post in the ground—on concrete, screed, or a wooden patio.
Important before ordering: The distance between the support post and the wall must not exceed 300 cm. Measure this distance before ordering—it determines whether the awning will fit your space.
You need a hammer drill with a 10 mm bit (drilling depth 9 cm) and approximately 30–45 minutes. The substrate must be load-bearing: solid brick, concrete, or masonry block. Suitable stand-off mounting is required for plasterboard or external thermal insulation composite systems.
The required hex key is included—you do not need any additional specialist tools.
Technical specifications
| Feature |
Value |
| Height |
160 cm |
| Max. extension width |
300 cm |
| Max. distance between support post and wall |
300 cm |
| Fabric color |
Beige |
| Mechanism |
Spring mechanism, self-retracting |
| Mounting type |
Wall mounting + ground post |
| Required drill hole |
10 mm, drilling depth 9 cm |
| Weight |
8.5 kg |
Scope of delivery
Cassette with fabric ×1 · Support post ×1 · Wall brackets ×2 · Mounting screws ×8 · Washers ×8 · Anchors ×8 · Hex key ×1 · Installation instructions
Frequently asked questions
Can the awning be installed without drilling?
No. The cassette must be firmly attached to the wall, and the support post must be anchored in the ground. The structure is under spring tension and withstands lateral forces.
How far may the support post be from the wall?
Maximum 300 cm. This is the most important measurement when planning—measure it before ordering.
Do I always have to extend the awning fully?
No. Extend the fabric continuously to the desired width and let it lock into place there.
What tools do I need?
A hammer drill with a 10 mm bit. The hex key for installation is included.
What should I do in strong winds?
Retract the fabric completely into the cassette. The same applies if the awning will be left unattended for an extended period.
